Child pages
  • 2.1 Post-installation

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: added line about hardware config

...

Code Block
titleMirroring rpool
root@host:~# zpool status
  pool: rpool
 state: ONLINE
  scan: none requested
config:
        NAME                     STATE     READ WRITE CKSUM
        rpool                    ONLINE       0     0     0
          c2t50014EE65AC710BCd0  ONLINE       0     0     0
errors: No known data errors

root@host:~# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
       0. c2t50014EE65AC68D37d0 <ATA-WDCWD10JFCX-68N-0A82 cyl 60798 alt 2 hd 255 sec 126>
          /scsi_vhci/disk@g50014ee65ac68d37
       1. c2t50014EE65AC710BCd0 <ATA-WDC WD10JFCX-68N-0A82-931.51GB>
          /scsi_vhci/disk@g50014ee65ac710bc
Specify disk (enter its number): ^C

root@host:~# zpool attach rpool c2t50014EE65AC710BCd0 c2t50014EE65AC68D37d0
Make sure to wait until resilver is done before rebooting.

Be sure to configure your hardware to boot from both devices in case of failure.