Child pages
  • Drives (HDD, CD, DVD and Tape)
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 81 Next »

Release

Type

Manufacturer

Model

Works (yes/no)

Notes and/or specific usage instructions

Contributor

oi_151aHDD 2.5 SATA-3CrucialM4-128GByes25nm MLC SSD

Jason Matthews

oi_151

PCIeDDRdriveX1yesIntended as ZIL. Works flawlesslyJason Matthews
oi_151aHDD 3.5 SATA-3HitachiHDS72404yes4TB of "Spinning Rust" properly recognized on LSI FalconJason Matthews
oi_151aHDD 2.5Intel520yes Jason Matthews
oi_151aHDD 2.5Intel710yes 

Jason Matthews

oi_151aPCIeIntel910yesWorks out of the boxJason Matthews
oi_151aHDD 2.5 SATA-3IntelDC S3500 480GByessix drives configured in mirrors yields 50k+ random reads/sec on ZFS, reports as ashift=9Jason Matthews
oi_151a8HDD 2.5 SATA-3IntelDC S3700 800GByes

Works as advertised, bench marking indicates 10% higher performance on 8k writes. Drives

are 4K may or may not advertise 512bytes varies on firmware revision. Beware, you cannot mix 4K/512B

drives within a VDEV

Jason Matthews
oi_151a9HDD 3.5 SASSeagateST4000NM0023yes4TB SAS spinning rust. Just works. 4K Advanced Sector  130MB/s seq writesJason Matthews

oi_151a9

HDD 2.5 SASWestern DigitalWD3001BKHGyes300GB 10Krpm SAS HDKen Mays
oi_151a5SCSISun MicrosystemsC5683AyesSUN C5683A (HP Rebrand) DDS4 DAT Tape driveJon Green
oi_151a5SATASeagate/DellST1000NM0001yesDisks not powered on (Dell Firmware problem), the trick is:

in /kernel/drv/sd.conf,

 sd-config-list= "SEAGATE ST1000NM0001","power-condition: false";

Jorge Palma Escobar

oi_148

HDD 3.5" SATA-2

Samsung

F4EG HD204UI/Z4

yes

SATA - Advanced Format and 4K Sector drives

Deano Calver

oi_148

HDD 3.5" SATA-2

Seagate

ST2000DL003-9VT1

yes

Barracuda Green. 4kB sectors with 512-byte emulation

Matt Connolly

oi_151aHDD 2.5 SASSeagateST9146852SSyes146GB 15k RPM SavvioJason Matthews
oi_151aHDD 2.5 SATA-3Western DigitalWD20NPVT-00Zyes2 TB SATA disk, reports as ashift=12 (adv format), recognized on LSI 9207-8iJason Matthews
  • No labels